A comparison of two types of light control systems : Open-and closed light control system and their different behaviors

Sammanfattning

Decreasing energy consumption has become increasingly important in recent times due to climate change. The average temperature is increasing across the planet, and with it, an increase in droughts and other climate disasters can be seen. There are multiple ways to decrease energy consummation, and one of them is to regulate the light in a building. Much research has been done on light control aiming at offices and workplaces using a close loop system. However, even if those solutions work in a home environment, other solutions could offer a better solution. One solution could be using an open-loop system that senses the ambient light and decides to control the light based on that. An open-loop system’s benefit is that it may not need a sensor for each area like the closed-loop system needs, but the performance of such a system is unknown. Therefore, this thesis takes it upon itself to explore the open-loop system and compare it to a closed-loop system. The goal of the thesis is to compare the performance of the two systems and discover what differs in terms of usability for end-use and development. The results of the thesis are that the performance of the open-loop system does lack in comparison with the closed-loop system, but it is still in a usable range and could likely be improved. The usability of the open-loop system is also worse in terms of the end-use and development. The open-loop system needs further steps and parts to work satisfyingly compared to the closed-loop system. Further research would have to be done to answer if the open-loop system could work with only one sensor and solve other problems. A few solutions are suggested, but further research would be required to raise the open-loop system to a proper working system accessible for end-use.